This web page explains motor assembly for both Outrunner Motor and EDF.
It starts explaining Outrunner Motor first and followed by how to install EDF.
Watch Animation Video
Note: Please watch the Animation and Assembly Video before reading the details below by clicking the following button if you have not done so. The videos explain the relationship between parts but not including details guide and alignment.
Hover your mouse cursor onto the figures above to find the step number.
Follow the step number shown above to assembly the outrunner motor including propeller and spinner.
It should be self explanatory by following the steps in the figure above.
Installing EDF Motor
Installing EDF into the plane should be straightforward.
Put the EDF into its position / location (watch the Animation and Assembly Videos if you have not done so).
With the help of heated rod, push the rod into provided EDF screw holes to create guided holes so that it would give ways to install the screws when locking the EDF.
Depend on the EDF brand, some have 2 screws and other 4 screws, the right figure only uses 2 screws. For locking, just use the screws by twisting down firmly with screwdriver until it locks the EDF position.